Introduction
There are many flange manufacturers in Iran, but one of the best flange manufacturers in Iran is AzinForge. This company has 20 years of experience in the field of flange and industrial equipment production and produces high quality and standard products. In this article, we will talk a little about flange and its types, and then we will discuss why to choose the flanges of Azin Forge company.
- 1 Introduction
- 2 What is a flange?
- 3 Flange material
- 4 Flange application
- 5 The best flange manufacturers in Iran
- 6 Production of flanges in different sizes
- 7 Some flanges produced
- 8 Production standards
- 9 The type of raw materials
- 10 Why AzinForge company?
- 11 The equipment of AzinForge company
- 12 Hydraulic press and ring rolling
- 13 Counterblow Hammer
- 14 Machining (CNC)
- 15 Customers of Azin Forge Company
- 16 Ways of communication
- 17 Call numbers
- 18 Emails
- 19 Addresses
What is a flange?
A flange is a connector that is used to connect pipes and industrial equipment to each other. These connections are usually made by bolting or welding, and its purpose is to create tight and leak-proof connections in piping systems and various industries. Flanges can be made in different types of materials and sizes, and in terms of pressure, temperature and surrounding environment, the material of the flange can also be different.
Flange material
The type of flanges can be different depending on the applications. Some common types of flanges are:
1. Stainless Steel: Commonly used in industrial applications and environments that require high corrosion resistance.
2. Carbon steel: used in industrial and mechanical applications.
3. Polymers: In flanges, plastics and rubber can be used for applications that require electrical insulation or chemical resistance.
4. Copper and brass: used in applications that require corrosion resistance and good thermal conductivity.
These are just a few examples of the types of flanges. Therefore, depending on the type of flange and its application, the appropriate material is used.
Flange application
1. Flanges are used to make connections between different pipes or equipment.
2. They are used as an intermediary between two pieces of pipe or equipment.
3. They provide strong and reliable connections.
The best flange manufacturers in Iran
AzinForge Company is the best flange manufacturer in the country and one of the leading flange manufacturers in Iran. This company is engaged in the production of various flanges including carbon steel, alloy steel and stainless steel. It also produces other parts of the oil, gas, petrochemical and power plant industries such as pipes and rims. Azin Forge Company is known as one of the leading companies in Iran’s steel and metallurgy industry and produces high quality products and international standards. This company uses advanced equipment and modern technology to produce high quality products that meet the needs of its customers.
Production of flanges in different sizes
Flanges produced in AzinForge company are produced as closed die forging and open die forging. The production of flanges in the form of closed die forging: 1/2 inch to 30 inches and also open die forging: 30 inches to 120 inches according to the standard is produced by this company. Also, larger size flanges are also produced in high or low temperature according to the customer’s order. The supply of flanges produced by Azin Forge Company is only possible through the signing of contracts with oil, gas, refining petrochemical companies and affiliated companies and is not offered in the market under any conditions.
Contact the sales department (central) in AzinForge for consultation, purchase and order of the desired product.
| Phone number | |
|---|---|
| +9858-37217753-5 | sales@azinforge.com |
Some flanges produced
Production standards
ASME B16.5 – ASME B16.34 – ASME B36.10 – ASME B36. 19 – MSS SP 6 – MSS SP 9 – MSS SP 25 – NACE MR 0175 – ASTM A105 – ASTM A182 – ASTMA350
The type of raw materials
AzinForge Company is engaged in the production of various flanges, including carbon steel, alloy steel and stainless steel, in the form of open die forge and closed die forge.
1. Carbon Steel: ASTM A105 – ASTM A350/ LF2
2. Alloy Steel: ASTM A182/ F1 – F5 – F9 – F11 – F17 – F22
3. Stainless Steel: ASTM A182/ F6 – F304 – F316 – F321 – F347 – F348
Why AzinForge company?
With more than 20 years of experience in the field of forging and production of all kinds of parts such as flanges, rims and pipes, using modern technology and quality raw materials, AzinForge Company is known as one of the best flange manufacturers in Iran. As one of the pioneers in the production of flanges and industrial equipment, this company has been able to gain a special position in the domestic and foreign markets due to its high quality, competitive price and good after-sales service.
The equipment of AzinForge company
Hydraulic press and ring rolling
This company has a hydraulic press machine 40MN (4000 tons) and an exclusive 5-meter ring rolling machine. AzinForge hydraulic press production line has 12 heating and heat treatment furnaces with a capacity of 120 tons and 2 water and polymer tanks with a total size of 290 cubic meters and the only 5 meter rolling ring machine in Iran, in addition to a 4000-ton hydraulic press machine. Azin Forge Company has turned the country’s forging industry hub, relying on technical knowledge, it will make the country unnecessary to import this type of products.
Counterblow Hammer
A Counterblow Hammer is a type of power hammer used in metalworking and forging processes. It is designed to deliver powerful blows to the workpiece with minimal vibration and recoil. The counterblow hammer uses two opposing hammers that strike the workpiece simultaneously, canceling out the forces and reducing the impact on the operator. This results in more precise and controlled forging operations, making it ideal for shaping metal parts with high accuracy and consistency.
Machining (CNC)
AzinForge Company uses 60 heavy and unique equipment, including a 9-meter lathe with a working diameter of 2.6 meters, a three-axis CNC milling machine with a length of 4.5 meters and a width of 1.6 meters, 20 half-turning machines Heavy and CNC borings are leading factories in the production of heavy steel parts used in the oil, gas, petrochemical, power plant, and other industries.
Customers of Azin Forge Company
AzinForge Company is proud to cooperate with companies such as: Mapna Group, Fateh Sanat Company, Energy Industries Design and Engineering Company, Bakhtar Petrochemical Company, South Oil-bearing Regions National Company, Pars Jonoubi Gas Complex Company, etc.
Ways of communication
Call numbers
1. Sales unit (central): +98-5837217753-5
2. Sales unit (Tehran): +98-2144443106
3. Sales unit (Mashhad): +98-5137597237
Emails
1. Sales unit (central): sales@azinforge.com
2. Sales unit (Tehran): commercial@azinforge.com
3. Sales unit (Mashhad): commercial2@azinforge.com
Addresses
1. Sales unit (central): North Khorasan Province, Esfarayen City, 5th Km of Esfarayen – Sankhast Road, Industrial Park
2. Sales unit (Tehran): Tehran, Ponak SQ, Golzar 3 Alley, Building N.10, 1st Unit.
3. Sales unit (Mashhad): Mashhad city, Northern Khayam Blvd, Between Khayam 61-63, Morvarid Building, Second Floor, Unit N.205
Sales department (Central):
| Phone number | |
|---|---|
| +9858-37217753-5 | sales@azinforge.com |
Sales department (Tehran):
| Phone number | |
|---|---|
| +9821-44443106 | commercial@azinforge.com |
Sales department (Mashhad):
| Phone number | |
|---|---|
| +9851-37597237 | commercial2@azinforge.com |
Follow AzinForge on LinkedIn and get access to our latest developments and projects in the field of forging and industrial design. Do not miss this opportunity and connect with us on this social network.
